Solar Safer

SOLAR WATER HEATER

A solar water heater is a device that captures sunlight to heat water. It can be an economical way to generate hot water for your family for shower and bath.

Solar water heater not only enables substantial energy savings as solar power is free in contrast to natural gas or fuel oil. Moreover, it is a way to produce hot water for sanitary use throughout the year without emitting any CO2. 

The system installed on a terrace or open space where it can get sunlight and the energy from the sun is then used to heat water and store it in an insulated tank. The system is not connected to electricity supply and thus does not have an on-off switch, but it uses the sunlight throughout the day to heat the water and store it in the storage tank. 

Most of the solar water heater on a sunny day can provide heater water at about 68° ±5° C temperature. Water from the storage tank can then be used for any application as desired.

When there is insufficient sunlight, the water is preheated and a back-up system takes over to bring the water to the required temperature. This system can be used at a constant temperature throughout the year.

A solar water heater is a device that captures sunlight to heat water. It can be an economical way to generate hot water for your family for shower and bath.

Solar water heater not only enables substantial energy savings as solar power is free in contrast to natural gas or fuel oil. Moreover, it is a way to produce hot water for sanitary use throughout the year without emitting any CO2. 

The system installed on a terrace or open space where it can get sunlight and the energy from the sun is then used to heat water and store it in an insulated tank. The system is not connected to electricity supply and thus does not have an on-off switch, but it uses the sunlight throughout the day to heat the water and store it in the storage tank. 

Most of the solar water heater on a sunny day can provide heater water at about 68° ±5° C temperature. Water from the storage tank can then be used for any application as desired.

When there is insufficient sunlight, the water is preheated and a back-up system takes over to bring the water to the required temperature. This system can be used at a constant temperature throughout the year.

^{HOW WE WORK}1. MOUNTING SOLAR COLLECTORS ON THE ROOF

The first step that you need to follow for installing a solar water heater at home is to mount solar collectors on the roof.  It is important not to make many roof penetrations during this process.

2. INSTALL STORAGE TANKThe next step to follow is to install the storage tank. For this, we need to first place the solar storage tank near the conventional water heater.
3. INSTALL THE PIPING AND PUMPNow the next step for installing a solar water heater is to install the piping and the pump.  For this first, we need to assemble the entire glycol loop without the solder and solder the entire loop.
4. INSTALL THE CONTROLSAfter this, we must install the controls. The differential controller must be installed so as the sense the temperature difference between the glycol at the top and the water at the bottom of the solar storage tank.
5. INSULATE WATER AND GLYCOL LINESThe final and last step is to insulate water and the glycol lines. This can be done by using standard foam pipe insulation.  Duct tape can be used for all the joints.


FEATURES:

• Micro channel heat exchanger
• Glass enamel tank
• Eco friendly refrigerant
• High COP
• Panasonic Special compressor
• Low Noise
• Steel cored advanced anode rod protection
• 360◦ insulation
• Hot water return line pump
• User friendly controller
• Suitable for low temperature environment

Storage Gas Geyser

Brand: Surya Solar and Water

^{When you are looking forward to cutting short your electricity bills and at the same time you want your water heating needs to be fulfilled then you should consider switching to Surya's Storage Gas Geyser.}

Features:

• Fully automatic auto-ignition system
• Flame failure protection mechanism for highest safety
• World-class silent stainless steel burner
• Low-pressure burner designed specifically to ensure optimum fuel efficiency
• Digital temperature indicator and controller
• Gas indication is available anywhere with musical alarm
• The boiler can be easily operated from hotel reception counter
• India’s only gas boiler with quality stainless steel/ mild steel inner tank, 8 bar pressure tested
• Temperature indicator dial gauge ranging from 0°C to 90°C degree
• 230V. AC/+12V DC supply for controls only

Application: Residential & Commercial Establishments.

Benefits:
• Easy to Install and Operate
• Maintenance-free Performance
• Optimum Fuel Efficiency
• Longer Lifespan
• LPG & PNG Gas Options Available
• Automatic Controls
• High Safety Standards
• Best Quality Raw Materials

Operating Instructions:

• Keep the cold water valve ON-Auto
• Turn the gas supply regulator to ON position-Auto
• Switch ON the power supply of Heater
• Set the temperature switch knob to the required temperature
• Auto-ignition will take place with reference to water temperature and system will operate automatically
• Drain the system periodically to prevent scaling and to improve tank life
• Suggested to use soft water
• Suggested to provide water & windproof shelter to the boiler. 

A solar water heater is a device that captures sunlight to heat water. It can be an economical way to generate hot water for your family for shower and bath.

Solar water heater not only enables substantial energy savings as solar power is free in contrast to natural gas or fuel oil. Moreover, it is a way to produce hot water for sanitary use throughout the year without emitting any CO2. 

The system installed on a terrace or open space where it can get sunlight and the energy from the sun is then used to heat water and store it in an insulated tank. The system is not connected to electricity supply and thus does not have an on-off switch, but it uses the sunlight throughout the day to heat the water and store it in the storage tank. 

Most of the solar water heater on a sunny day can provide heater water at about 68° ±5° C temperature. Water from the storage tank can then be used for any application as desired.

When there is insufficient sunlight, the water is preheated and a back-up system takes over to bring the water to the required temperature. This system can be used at a constant temperature throughout the year.

^{HOW WE WORK}1. MOUNTING SOLAR COLLECTORS ON THE ROOF

The first step that you need to follow for installing a solar water heater at home is to mount solar collectors on the roof.  It is important not to make many roof penetrations during this process.

2. INSTALL STORAGE TANKThe next step to follow is to install the storage tank. For this, we need to first place the solar storage tank near the conventional water heater.
3. INSTALL THE PIPING AND PUMPNow the next step for installing a solar water heater is to install the piping and the pump.  For this first, we need to assemble the entire glycol loop without the solder and solder the entire loop.
4. INSTALL THE CONTROLSAfter this, we must install the controls. The differential controller must be installed so as the sense the temperature difference between the glycol at the top and the water at the bottom of the solar storage tank.
5. INSULATE WATER AND GLYCOL LINESThe final and last step is to insulate water and the glycol lines. This can be done by using standard foam pipe insulation.  Duct tape can be used for all the joints.


FEATURES:

• Micro channel heat exchanger
• Glass enamel tank
• Eco friendly refrigerant
• High COP
• Panasonic Special compressor
• Low Noise
• Steel cored advanced anode rod protection
• 360◦ insulation
• Hot water return line pump
• User friendly controller
• Suitable for low temperature environment

A solar water heater is a device that captures sunlight to heat water. It can be an economical way to generate hot water for your family for shower and bath.

Solar water heater not only enables substantial energy savings as solar power is free in contrast to natural gas or fuel oil. Moreover, it is a way to produce hot water for sanitary use throughout the year without emitting any CO2. 

The system installed on a terrace or open space where it can get sunlight and the energy from the sun is then used to heat water and store it in an insulated tank. The system is not connected to electricity supply and thus does not have an on-off switch, but it uses the sunlight throughout the day to heat the water and store it in the storage tank. 

Most of the solar water heater on a sunny day can provide heater water at about 68° ±5° C temperature. Water from the storage tank can then be used for any application as desired.

When there is insufficient sunlight, the water is preheated and a back-up system takes over to bring the water to the required temperature. This system can be used at a constant temperature throughout the year.

^{HOW WE WORK}1. MOUNTING SOLAR COLLECTORS ON THE ROOF

The first step that you need to follow for installing a solar water heater at home is to mount solar collectors on the roof.  It is important not to make many roof penetrations during this process.

2. INSTALL STORAGE TANKThe next step to follow is to install the storage tank. For this, we need to first place the solar storage tank near the conventional water heater.
3. INSTALL THE PIPING AND PUMPNow the next step for installing a solar water heater is to install the piping and the pump.  For this first, we need to assemble the entire glycol loop without the solder and solder the entire loop.
4. INSTALL THE CONTROLSAfter this, we must install the controls. The differential controller must be installed so as the sense the temperature difference between the glycol at the top and the water at the bottom of the solar storage tank.
5. INSULATE WATER AND GLYCOL LINESThe final and last step is to insulate water and the glycol lines. This can be done by using standard foam pipe insulation.  Duct tape can be used for all the joints.


FEATURES:

• Micro channel heat exchanger
• Glass enamel tank
• Eco friendly refrigerant
• High COP
• Panasonic Special compressor
• Low Noise
• Steel cored advanced anode rod protection
• 360◦ insulation
• Hot water return line pump
• User friendly controller
• Suitable for low temperature environment

Water Pressure Tank 

Surya Solar and Waters 

Model No.: BGS-8 | BGS-18 | BGS-24 | BGS-60 | BGS-80 | BGS-100 | BGS-160 | BGS-200 | BGS-240 | BGS-300 | BGS-450 

Boosto Global Tank

Pressure tank is an essential part of a pressurized water system that provides water pressure at a set level. 

The tank stores supplemental water between diaphragm and liner, and the pressurized air chamber is able to create a supply circle. This process reduces the number of times the motor need to start in order for the system pressure to remain at the set level. The tension of diaphragm maintains water pressure within the system, ensuring proper operation of the water Utilities, robust flow for showering and bathing. Boosto pressure tank is an energy saving device and no maintenance is needed. A properly sized Pressure pump and pump tank will work as a team to meet your needs and will deliver many years of dependable service. 

Why Boosto diaphragm tank? 
A diaphragm tank allows the system N2 cushion to be separated from the system water. This prevents water from leaking since the N2 is between the tank wall and the outside of the diaphragm and the system water is on the other side. Boosto pressure tank shell has a best in class Polyester powder coated food grade material.

A pressure tank is an important part of any well system.

It ensures that your home is always getting enough water. Pressure tanks also protect your pump from short-cycling. If you didn't have a pressure tank, the pump would turn on and off every time someone turned the faucet on. 


Qualities of Boosto Global Tank

• Shell : Cold Rolled Carbon Steel

• Connection : 304 S.S
• Coating : Triple Grade Blue Paint
• Diaphragm:  Heavy -Duty Butyl Rubber
• Liner Material: High Quality Food Grade Polypropylene
• Pre-Charge:  30 PSI | 2 Bar  
• Working Temperature (Max) : 70°C |  158°F
• Working Pressure (Max) : 150PSI |  10 Bar  

Surya All in one Heat Pump
Hot Water in Winter

High Efficient Mirco Channel Heat Exchanger

Surya heat pumps
All in one heat pumps are designed for hot water need for sanitary use for all kind of domestic use with luxury features. Heat pumps with special technology, where heat transfer media – refrigerant is circulated through heat exchanger, which is wrapped on outside surface of tank. The surface is insulated with heat resistant material. There is no direct contact between water & heat exchanger, it does not allow scale deposition.   

Salient features

Highly efficient micro-channel heat exchanger

• Heat exchanger is made with micro channel having larger heat  transfer area
• It gives better heat transfer effect & gives stable & efficient Performance
• No direct contact water inside tank & heat exchanger
• No possibility of heat exchanger corrosion, leakage, scaling etc

Glasslined water tank

• Tanks are made from superior quality steel & world’s best enamel coated inside (Heated upto 850°c)
• Enamel coating makes no contact between steel metal or welding and water
• It prevents from corrosion or rusting and gives longer  Span of life
• tanks are manufactured in plant; adopted international Standard & ultimate technology in its field

High efficient compressor

• Internationally renowned brand highly efficient scroll Compressor, It is more durable & silent in operation
• With smart defrosting design, it can solve the  Obstruction of heat exchangers in cold winter such as frosting and slow heating,experience you a more comfortable winter
• Can work efficiently in wide ambient range From  -5 to 55°c

Key points about  SURYA ALL IN ONE HEAT PUMPS

• Heat pumps are desined to work with wide ambient temperature range from  -5 to 55°c
• Cylindrical design with high heat resistance polyurethane insulation cladded with galvanised   steel
• Eco- friendly refrigerant suitable to work at low pressure
• Multifunctional controller with easy & user –friendly  operation
• Special design of micro channel heat exchanger enhances the heat pump performance
• Magnesium anode inserted in tank to protect internal surface of tank from corrosive substances
• Water temperature can reach up to 75°c in tank ( With backup)
• Installation is very simple – plug & play type